ZComax AG-622, Руководство по установке

Страница: 3 / 5

11b mode; 11, 5.5, 2, 1 Mbps
Turbo mode: 108, 96, 72, 48, 36, 24, 18, 12 Mbps
11a/11g: Tx: 850mA; Rx: 450mA (max)
Power Consuption
11b: Tx: 700mA; Rx: 400mA (max)
PHYSICAL SPECIFICATIONS
Dimensions 59.60mm(L)*44.45mm(W)*3.30mm(H)
Weight <20g
ENVIRONMENTAL SPECIFICATIONS
Temperature (Ambient) Humidity (non-condensing)
Operating
0~55
℃
90
﹪
Storage
-20~65
℃
5~95
﹪
4. Hardware Installation
The following sections in this chapter describe how to install AG-622 Module
4.1. Installation Overview
AG-622 wireless module is design for PC, Access Point, Router, ATU-R, Printer Server
series, IP Camera series and Internet Video Server.
4.2. Safety Recommendations
The safety guidelines are as follows:
λ
Keep the board area clear and dust-free before, during, and after installation.
λ
Keep tools away from walk areas where you and others could fall over them.
λ
Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains, that
could get caught in the board.
λ
Wear safety glasses if you are working under any conditions that might be
hazardous to your eyes.
λ
Do not perform any action that creates a potential hazard to people or makes
the equipment unsafe.
λ
Never attempt to lift an object that is too heavy for one person to handle.
4.3. Maintaining Safety with Electricity
Warning: Before working on a board or working near power supplies, unplug the power
cord on AC units; on DC units, disconnect the power at the circuit breaker
.
Follow these guidelines when working on equipment powered by electricity:
λ
Do not work alone if potentially hazardous conditions exist anywhere in your
work space.
λ
Never assume that power is disconnected from a circuit; always check the
circuit.
extension cables, frayed power cords, and missing safety grounds.
λ
If an electrical accident occurs, proceed as follows:
–
Use caution; do not become a victim yourself.
–
Disconnect power from the system.
–
If possible, send another person to get medical aid. Otherwise, assess the condition of
the victim and then call for help.
–
Determine if the person needs rescue breathing or external cardiac compressions;
then take appropriate action.
- 7 -
4.4.
Installing a
AG-622