P. 87
transmission. Under the mode except wireless client mode, enable
“
Wireless Separation
” can
prevent the communication among associated wireless clients.
WMM Support
: WMM (Wi-Fi Multimedia) is a subset of 802.11e. It allows wireless communication
to define a priority limit on the basis of data type under AP mode only, thus those time-sensitive
data, like video/audio data, may own a higher priority than common one. To enable WMM, the
wireless client should also support it
Max. Station Number:
By checking the
“
Max. Station Num
” the ZAC Wireless CPE will only
allow up to 32 wireless clients to associate with for better bandwidth for each client. By disabling
the checkbox the ZAC Wireless CPE will allow up to 128 clients to connect, but it is likely to cause
network congestion or poor performance.
Security Setting:
To prevent unauthorized radios from accessing data transmitting over the connectivity, the IEEE
802.11a/n ZAC Wireless CPE provides you with rock solid security settings.
Network Authentication
Open System
: It allows any device to join the network without performing any security check.
Shared Key
: Data encryption and key are required for wireless authentication (Not available in
Bridge/AP Repeater mode).
Legacy 802.1x
: It provides the rights to access the wireless network and wired Ethernet. With
User and PC identity, centralized authentication as well as dynamic key management, it controls
the security risk of wireless network to the lowest. To serve the 802.1x, at least one EAP type
should be supported by the RADIUS Server, AP and wireless client.
WPA with RADIUS
: Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i standard.
With warrant (username, password and etc.) offered by user, this kind of authentication can be
realized with specific RADIUS server. This is the common way to be adopted in large enterprise
network.
WPA2 with RADIUS
: WPA2 (IEEE 802.11i) is a wireless security standard that defines stronger
encryption, authentication and key management than WPA. If it is selected, AES encryption and
RADIUS server are required.
WPA&WPA2 with RADIUS
: It provides options of WPA (TKIP) or WPA2 (AES) for the client. If it is
selected, the data encryption type must be TKIP + AES and the RADIUS server must be set.
