P. 69
General Settings:
Device Mode
: Three modes are provided:
AC+Thin AP
,
Thin AP
,
FAT AP
. Select AC+Thin AP
to have the device act as virtual access controller to manage other ZAC-managed APs on your
network. Select
“Thin AP” to have the ZAC Wireless CPE managed by the ZAC AP in AC mode.
Select FAT AP to perform as a standalone AP, neither managing nor managed by other ZAC APs.
Device Name
: Specify the device name, which is composed of no more than 15 characters with
(0-9), (A-Z), (a-z) or (-).
Ethernet Data Rate
: Specify the transmission rate of data for Ethernet. Default is
Auto
.
IP Address Assignment:
Obtain IP Address Automatically
: If a DHCP server exists in your network, you can check this
option, thus the IEEE 802.11n ZAC Access Pioint is able to obtain IP settings automatically from
the DHCP server.
Use Fixed IP Address
: Check this option. You have to specify a static IP address, subnet mask,
default gateway and DNS server for the ZAC Wireless CPE manually. Make sure the specified IP
address is unique on your network in order to prevent IP conflict.
Enable 802.1Q VLAN
To be able to access the web page of the ZAC-managed AP in the VLAN network, you need to
assign the VLAN management ID for the ZAC-managed AP. Note that the ID on the switch must
be identical of the AP
’s VLAN ID. Check
Enable 802.1Q VLAN
checkbox to activate it.
Management VLAN ID
: Enter the VLAN ID.
