AS220V2
2x2 Dual Band 802.11ac Wave 2 Indoor Access Point
QSG
1
Package Contents
One indoor
access point
One mounting bracket
+ one screw
Two mounting bracket screws
+ screw anchors
One
allen wrench
One quick start guide
Note:
If any of the items, mentioned above, are not included in the packaging or are
damaged in any way, contact your reseller immediately.
Installation Requirements
TERMS OF USE: All Ethernet cabling runs must use CAT5e, 24AWG (or above) Shielded Twisted Pair
(STP) cabling. It is the professional installer’s responsibility to follow local country regulations,
including operation within legal frequency channels, output power, indoor cabling requirements,
and Dynamic Frequency Selection (DFS) requirements.
Mounting the Access Point
In-wall mount
Determine where you want to mount the device, position the socket into the slot.
Insert the mounting bracket into the socket using
the two screws (included in the packaging).
Slide the device onto the mounting
bracket to finish the installation.
Note:
Before lock two screws into the socket, please reserve space up to 15 cm in length
above bracket for installation.
