TSM500i and TsmWeb User Guide (PCI HSM v3) (PR-D2-1037 Rev 1.1)
| Page 41
Zazoo Limited, Co. No 9265606 | Directors: Dr S C P Belamant (French),
Mr H G Kotze, Mr P M Belamant | Company Secretary: Ms C W van Straaten
www.zazooltd.com
4.12
Upgrading TSM500i firmware
A TSM500i ships from Prism with the customer-specified version of firmware. If you receive an upgrade from
Prism, login to TSM-WEB and select
TSM
from the side menu to load the
TSM management
page. Click
on
Reset to Loader
in the
TSM
M
anagement
page to set the TSM500i HSM to the
Loader
state. Additionally,
if the firmware to be loaded is of a different type OR if the firmware version is earlier than the current version,
then the Crypto Officer role will need to be assumed.
When updating the TSM500i firmware, the
Access Control Mode
should be:
BL:LOADER_ROLE_
OFFICER
if loading firmware of same type & later version
BL:LOADER_ROLE_DUAL_
OFFICER
if loading firmware of different type or earlier version
Click on “Update Firmware”
tab on the
TSM
M
anagement
page, browse to the file that was provided by Prism
and then click on
Update Firmware
. To launch the application after the firmware has been successfully
loaded, click on
Reset to App
.
Downgrading the firmware version or changing firmware type will result in the erasure all keys stored
in the TSM500i HSM.
A firmware upgrade of the same firmware type will preserve the keys stored in the TSM500i HSM.
When the Crypto Officer role is required to load new firmware, all working keys will be erased
.
