Zator DLK22LV, Руководство пользователя и по обслуживанию

Страница: 10 / 40

USER AND MAINTENANCE MANUAL
ELECTROMAGNETIC VALVE DLK22LV
10
Condemnation of conformity flaw - Goods reception
The original configuration of the electromagnetic valve never must be changed.
On goods reception, check that:
• The packaging is intact
• The exact correspondence of the commissioned material
In case of damages or wrong delivery contact immediately Zator Srl.
The buyer, on penalty of warranty decadence, must report in writing the flaw conformity or fault of the
electromagnetic valve to the seller, specifying in detail the nature, within eight days from their discovery.
In no case the condemnation of conformity flaw or fault may be validly made after the expiration date of
the warranty terms.
Also the buyer decays from the warranty if doesn’t allow each reasonable control that the seller requires.
It’s excluded from this warranty the most damage caused to the machine by the failure timely
condemnation to the seller of a conformity flaw or fault of the the electromagnetic valve.
This warranty is only valid for products of new construction.
This warranty is limited to the reparation or replacement, by the seller, of each parts of the machine or
supplied material that results flawed, after checking the existence of the flaw.
In no case the seller will be liable for every consequential or indirect flaws or otherwise derived from
production cycle interruption or machine stoppage.
The seller is not liable for flaws of the electromagnetic valve derived from the use of devices, equipments,
etc. that are enquired and provided by the customer and installed on the machine to change its use
compared to the original design.
The seller is not liable for every conformity flaws of the electromagnetic valve or faults owed for the
normal wear of those parts that, by their nature, are subject to rapid and continuous wear.
The seller also is not liable for damages resulting from improper use of the equipment and from the non-
observance of the norms expected for the execution of the ordinary periodic maintenance.
The seller is not liable for conformity flaws of the electromagnetic valve or faults that depends on changes,
reparations, alterations or tampering attributed to the buyer and however non-authorized personnel of
the buyer.
The costs relative to the wear materials necessary for test and restart the electromagnetic valve are on
charge of the buyer.
1.3 Warranty restrictions