Zato CAYMAN FCE II Series, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 79 / 96

79 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
7.2.3.6
replacing the razor blade
To replace the razor blade you must have:
- a dowel pin�
For the following description, refer to fig. 35 on page 79 �
To replace the razor blade, perform the operations below in the following order:
1� remove the fastening screws on the 2 guide blades (1) ;
2� insert the dowel pin in the blade face holes of the guide blades;
3� pinch the dowel pin to remove the centring pins and guide blades;
4� remove the fastening screws on the razor blade
(2) ;
5� remove the razor blade;
6� clean the razor blade housing by referring to
“7.2.1 Cleaning” on page 60 �
7� put in the new razor blade;
8� secure the razor blade by referring to
“7.2.2.11 how to make sure the blade screws and bolts are
tightened properly” on page 70 ;
9� put in the guide blades;
10� insert the centring plugs on the guide blades;
11� secure the guide blades by referring to
“7.2.2.11 how to make sure the blade screws and bolts are
tightened properly” on page 70 ;
12� check the clearance between the upper jaws and the razor blade by referring to “7.2.2.5 Checks on the
shears” on page 64 �
2
1
fig. 35 Replacing the razor blade