![background image](http://html1.mh-extra.com/html/zass/zsmc-02/zsmc-02_operating-instructions-manual_3192949007.webp)
7.
TROUBLESHOOTING
7
PROBLEM
POSSIBLE CAUSE
SOLUTIONS
STEAM MOP DOES NOT
OPERATE
1. Power cord not firmly plugged
into outlet.
2. No power in outlet.
3. Needs repair servicing.
1. Plug firmly.
2. Check fuse or breaker.
Replace fuse/reset breaker.
FOR THE FIRST TIME USE
STEAM MOP, WATER PUMP
KEEP MAKING NOISE
1. There is no water in water
tank.
1. Please add water into water
tank.
STEAM MOP DOES NOT MAKE
STEAM
1. No water in tank.
2. Forget to turn on steam button.
1. Add water to the water tank
following instructions.
2. Turn on the steam button and
wait 20s for its preheating.
STEAM MOP LEAVES WATER
ON THE FLOOR
1. Micro-fiber cleaning pad is
too wet.
2. Low temperature of the steam
resulted too much moisture.
1. Unplug unit from power outlet
and change the micro-fiber
cleaning pad.
2. After turn on the steam mop,
wait for 30s, then use it to mop
the floor.
STEAM MOP LEFT WHITE
SPOT IN FLOOR
1. Steam mop left in one spot
too long.
2. Hard water.
1. Never leave the steam mop
on the floor with a damp or wet
cleaning pad still attached when
not in use.
2. Use distilled water.
THE FLOOR IS STILL DIRTY
AFTER CLEANING
1. Micro-fiber cleaning pad is
too dirty.
2. Mild detergent is not.
1. Turn off the appliance, change
a clean one.
2. Wash the micro-fiber.
English
Содержание ZSMC 02
Страница 2: ...1 2 3 4 5 6 7 8 9...
Страница 19: ...NOTES NOTI E JEGYZETEK 19...