Zass ZSMC 02, Руководство по эксплуатации

Страница: 4 / 20

3. OPERATING INSTRUCTIONS
4
How to Assemble Your Steam Mop
1. Remove all the parts from the packaging.
2. Insert handle into the pole (as shown in picture 1). Push it in until you hear it click
into the right place.
3. To disassemble the handle, pull out the cord wrap (as shown in picture 2).
4. Push insert button on pole, then insert the pole assembled with handle into main
body. Make sure that the locking tab snaps into right place (as shown in picture 3).
2. KEY TO MACHINE PARTS (Page 2)
1
2
3
4
5
8
9
6
7
- Main body;
- Cord wrap;
- Handle;
- Support pole;
- Release button of water tank;
- 1 Carpet glider;
- 2 Cleaning pads.
- Power switch;
- Mop head;
WARNING:
Your steam mop is designed to clean floor with hard surfaces that can
withstand high heat. Do not use on unsealed wood floor or unglazed ceramic floors.
On surfaces that have been treated with wax floors, the sheen may be removed by the
heat and steam action. It is always recommended to test an isolated area of the surface
before proceeding. We also recommend that you check the use and care instructions
from the floor manufacturer.
WARNING:
Danger of Scalding. Please use caution when using the steam mop. The
steam emitted from the openings is very hot.
IMPORTANT:
Do not store unit with damp/wet micro-fiber cleaning pad attached. Do
not store cleaning solutions, scented perfumes, oils or any other chemicals to the
water used in this appliance. If you live in a hard water area, we recommend using
distilled water in your steam mop.
IMPORTANT
IN ORDER TO PREVENT RISKS, YOU ARE STRICTLY FORBIDDEN TO REPLACE POWER
CABLE YOURSELF. IN CASE OF DAMAGE IT SHOULD BE REPLACED BY THE LOCAL
DISTRIBUTOR’S AFTER-SALES SERVICE DEPARTMENT, THE MANUFACTURER, THEIR AFTER-
SALES SERVICE OR A SIMILARLY QUALIFIED PERSON.
IF YOUR APPLIANCE HAS BEEN DROPPED, HAVE IT CHECKED BY A PROFESSIONNAL
BEFORE USING AGAIN. INTERNAL DAMAGE MAY CAUSE ACCIDENTS.
IN THE CASE OF PROBLEMS AND REPAIRS OF ALL TYPES CALL THE LOCAL DISTRIBUTOR’S
AFTER-SALES SERVICE DEPARTMENT, THE MANUFACTURER, THEIR AFTER-SALES SERVICE
OR A SIMILARLY QUALIFIED PERSON, IN ORDER TO PREVENT RISKS.