5. Disassemble the tube, push release button on the back of main body, then pull the
support pole out (as shown in picture 3).
Using Steam Mop
Important: never use the steam mop without the micro-fiber cleaning pad attached to
the mop head or without water in the water tank.
1.Please tidy up the area that needs steam cleaning before using the steam mop.
2.Place the micro-fiber cleaning pad underneath the mop head. Make sure that the
velcro are facing up.(as shown in picture 1)
3.Push the “PUSH”button on main body, then lift up to remove the water tank.(as
shown in picture 2)
4.Turn the cap counter clockwise(as shown in picture 3), pour water into water tank.
Do not overfill the water tank. Keep the water level below the TOP line marked “450ml
”on the water tank.
5.Replace cap clockwise onto the water tank.
6.Replace water tank onto main body.
7.Turn the cord wrap on the handle to unwrap the power cord quickly and completely.
8.Plug into electrical outlet. Make sure the voltage matches with the appliance.
9.Turn on power switch.
10.It takes approximately 35 seconds for the appliance heat up and provide steam.
11.Wait a few seconds, let the micro-fiber cleaning pad dampen first, then begin
mopping floor with a forward and backward motion.
12.When water tank is empty, the steam mop will stop emitting steam.Unplug the
power cord from the electrical outlet and refill the water tank following the instructions
above.
13.Remove cleaning pad, put carpet glider to clean the carpet at home.
5
English
Содержание ZSMC 02
Страница 2: ...1 2 3 4 5 6 7 8 9...
Страница 19: ...NOTES NOTI E JEGYZETEK 19...