![background image](http://html1.mh-extra.com/html/zass/zpac-09/zpac-09_operating-instructions-manual_3180802005.webp)
3. PRODUCT USE
5
English
3.1. Connect Power Supply
• For the first use, please connect power supply, then refer to step 2 “water inflow”.
• When it is not used for the first time or there is water in the water tank, insert the power plug into the
power socket and press the [power] key on the control panel.
3.2. Water Inflow
In case of water shortage alarm (no water in the water tank during the first use or water shortage during
use), please follow the steps below to feed water into the water tank inside the machine.
• Use inlet/outlet pipeline to connect this machine with faucet. Press the water inlet key, and the faucet
should be turned on at the same time.
• When the water level reaches the specified height, the water inlet valve will automatically close to
complete the water inlet.
• Remove the water inlet /outlet pipe and screw the water inlet knob cover.
3.3. Cooling
• Press the [mode] key to select the cooling function
• Press the [+] or [-] key to set the cooling temperature, and set the temperature range between 16°C and
32°C
• Press the [wind speed] key to select low wind, high wind and automatic wind speed
• Press the [swing wind] key to select the upper and lower swing blades to swing or stop.
NOTE: a). It displays the actual air inlet temperature during cooling.
b). When the cooling capacity of the water in the water tank is used up (the water temperature
reaches 50
°C
), the cooling shall be stopped, and the water can only be used after the cold storage or the
high-temperature water in the water tank is replaced.
3.4. Strong Cooling
This mode can be used when fast cooling is required.
• Press the [mode] key to select the forced cooling function
• Press the [+] or [-] key to set the strong cooling temperature, and set the temperature range between
16°C and 32°C
• Press the [swing wind] key to select the upper and lower swing blades to swing or stop.
NOTE: a). It displays the actual air inlet temperature during cooling.
b). When the cooling capacity of the water in the water tank is used up (the water temperature
reaches 50
°C
), the cooling shall be stopped, and the water can only be used after the cold storage or the
high-temperature water in the water tank is replaced.
3.5. Dehumidification
• Press the [mode] key to select the dehumidification function
• Press the [+] or [-] key to set the temperature, and set the temperature range between 20°C and 32°C
• Press the [swing wind] key to select the upper and lower swing blades to swing or stop.
NOTE:
It displays the actual air inlet temperature during dehumidification.
3.6. Cold Storage
• Press the [mode] key to select the cold storage function
• Press the [+] or [-] key to set the cooling temperature, The lower the setting temperature is, the greater
the storage capacity is. Set the temperature range between -6°C and 5°C.
• After the completion of cold storage, it will automatically enter the standby insulation state.
Содержание ZPAC 09
Страница 27: ...NOTES NOTI E JEGYZETEK 27...