![background image](http://html1.mh-extra.com/html/zass/zgs-05/zgs-05_operating-instructions-manual_3189456005.webp)
FABRIC STEAMING
CAUTION: When steaming any material for the first time, it is recommended
that you test on a small inconspicuous area before proceeding. Do not use on
synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive
materials.
NOTE: Be sure that Tank has already been fifi lled before following these steps.
1. Plug power cord into a standard grounded electrical outlet.
2. The power indicator light flashing in red color for preheating,after approximately
45 seconds, the power indicator light will turn from red to green, indicating the unit is
ready to use.
3. Direct Steam Nozzle towards fabric material you wish to steam. To release steam,
press the Steam Button to activate continuous steam (see picture 6).
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction (away
from
Yourself and kids, other people, pets and plants) when steaming.
When you fi nish using your Handheld Fabric Steamer, immediately unplug power
cord from electrical outlet. Refer to Storage & Care guidelines for proper storage and
maintenance procedures.
Security and Protection
* Thermostat: When the tank is lack of water, the thermostat will keep temperature by
controlling the electric current within the rated temperature.
* Thermal cut-off: when the thermostat is damaged or fails in the host, then protected
by thermal fuse protection device. When the machine temperature rises to the warning
temperature, the thermal fuse will promptly cut off the host power supply, in order to
avoid danger.
Warning
*Risk to Children and Impaired Persons.
*Supervision is required during the installation, operation, cleaning and maintenance
of this product by children under age 12 and anyone with reduced physical, sensory
or mental capabilities.
*Children should be supervised to ensure that they do not play with the appliance, its
parts and packaging material.
Product Storage
1. Push the power ON/OFF switch (Power indicator light will turn off) and unplug the
power cord.
2.Allow unit time to cool (at least 30 minutes).
3.Remove Water Tank and drain any remaining water into a sink or tub to minimize
potential mineral build-up. Replace Water Tank when done.
4. Store Handheld Fabric Steamer in a cool, dry location.
5
English
Содержание ZGS 05
Страница 2: ...1 6 2 3 4 5...
Страница 7: ...NOTES 7...
Страница 12: ...NOTI E...
Страница 17: ...JEGYZETEK...