G550 Automatic Gate Opener
Installation Manual
40
Solar Powered Battery Charger
(GSP5: 5-watt; GSP10: 10-watt). The Solar Panel charges the 12
volt battery when AC power is not available, or is more than 1,000 feet away.
Push-Button Control
(GB1). Opens the gate with a push of a button located in a garage or other
location that is easily accessible when wanting to open or close the gate.
Pin Lock
(GPL1). The Pin Lock replaces the clevis pin when mounting the actuator to the brackets.
It helps to prevent theft of the actuator from the gate, while allowing quick release of the opener.
One-Button Transmitter
(GT1). The Transmitter works similar to transmitters frequently used with
garage door openers. It allows you to open or close the gate from a remote location (typically your
vehicle). It has a range up to 300 feet.
Two Button Transmitter
(GT2). The Two Button Transmitter provides the capability to remotely
operate two separate devices such as two gates, or a gate and garage door. It has a range up to
300 feet.
Three Button Transmitter
(GT3). The Three Button Transmitter provides the ability to remotely
operate three separate devices. It has a range up to 300 feet.
Mini Transmitter
(GKF1). The Key Chain Transmitter fits on a keychain and allows you to open
and close the gate from a remote location. It has a range up to 300 feet.
Keypad
(GKP1). The Keypad allows for entry by authorized guests informed of your pre-set code.
Entering the correct code causes the gate to open or close. The access code is easily modified.
In-Ground Vehicle Sensor
(GS1). The sensor is buried near the gate and senses a vehicle that
passes within its 12-foot range. Once detected, the gate opens automatically.
Automatic Gate Lock
(GL1). The Automatic Gate Lock provides an additional level of security for
your property. When your gate swings shut, the gate lock closes, securing your gate in the closed
position.
Garage Door Receiver
(GDR1). The Garage Door Receiver is an adapter kit for your garage door
opener that allows you to use your Zareba transmitter device to open your garage door
and
your
gate. Eliminates the need for multiple control devices.
Push-to-Open Bracket
(GAB1). This bracket is necessary for push-to-open installations. Push-to-
open installations may be necessary due to a sloped driveway or other installation-specific reasons.
Replacement Battery
(GRB1). Standard 12 volt, 7.2 amp-hour, maintenance-free battery for the
Zareba Automatic Gate Opener.
Low-Voltage Wire
(GW1). 16-gauge, multi-stranded, dual-conductor low voltage wire used to
connect the AC-powered transformer to the control box.
Also available –
Heavy Duty Automatic Gate Opener
(G750/G752). Automatic Gate Opener kit designed to open
gates up to 20 ft. long and 1,000 lbs.
Please check with your local Zareba retailer for products. If the products you need are not avail-
able, you may purchase them directly from Zareba Systems.
GATE OPENER ACCESSORIES
AU
TO
M
AT
IC
G
AT
E
O
PE
N
ER
B
AT
TE
RY
