G550 Automatic Gate Opener
Installation Manual
24
Connect Battery Power to the Control Box
(fig. 23)
NOTE:
Ensure the control box power switch is in the OFF
position. The control box power switch is located on the
bottom of the control box.
Step 13
(fig. 24)
With the control box power switch in the OFF position
connect the battery wire harness to the battery by con-
necting the RED wire to the RED (+) terminal on the
battery and connecting the BLACK wire to the BLACK
(-) terminal on the battery.
CAUTION:
Ensure that the wires and terminals match
colors. If the battery wire harness is installed incorrectly,
it may damage the control board.
Battery wires
Battery (included)
Space for optional second battery
Strain relief
BLACK (-) terminal
RED (+) terminal
Figure 24
ON/OFF switch
Figure 23
