Zanussi ZZP35901XK, Руководство пользователя

Страница: 20 / 28

CAUTION! If there are other
appliances installed in the same
cabinet, do not use them at the same
time as the Pyrolysis function. It can
cause damage to the appliance.
1. Remove the worst dirt manually.
2. Clean the inner side of the door with hot water,
so that the residues do not burn from the hot
air.
3. Set the Pyrolysis function. Refer to "Oven
functions".
flashes.
4. You can use the End function to delay the start
of the cleaning procedure.
5. Press or turn the knob for the temperature
clockwise to start the cleaning procedure.
Time of the procedure: 2 h.
During the Pyrolysis the oven lamp is off.
When the oven is at its set temperature, the door
locks. The display shows the symbol and the
bars of the heat indicator until the door unlocks.
CLEANING REMINDER
To remind you that the pyrolysis is necessary, PYR
flashes in the display for 10 seconds after each
activation and deactivation of the oven.
The cleaning reminder goes out:
• after the end of the pyrolysis.
• if you press and at the same
time while PYR flashes in the
display.
REMOVING AND INSTALLING DOOR
The oven door has four glass panels. You can
remove the oven door and the internal glass panels
to clean them. Read the whole "Removing and
installing door" instruction before you remove the
glass panels.
The oven door may close if you try to
remove the glass panels before you
remove the oven door.
CAUTION! Do not use the oven
without the glass panels.
1. Open the door fully and hold both hinges.
2. Lift and turn the levers fully on both hinges.
3. Close the oven door halfway to the first
opening position. Then lift and pull forward and
remove the door from its seat.
4. Put the door on a soft cloth on a stable surface.
20