Zanussi ZWD11683NS Скачать руководство пользователя страница 24

Страница: 24 / 40

Changing the delay start after the countdown

has started
To change the delay start:
1. Touch the Start/Pause

button to pause the

appliance. The related indicator flashes.

2. Touch the Delay Start button repeatedly until

the display shows the desired delay time.

3. Touch the Start/Pause

button again to

start the new countdown.

THE AUTOADJUST SYSTEM LOAD

DETECTION

The programme duration in the display

is referred to a medium/high load.

After touching the Start/Pause

button, the

maximum declared load indicator goes off, the

AutoAdjust System starts the laundry load

detection:
1. The appliance detects the load in the first 30

seconds. In the programmes where Time

Manager is available, during this phase the
Time Manager bars

placed below the

time digits play a simple animation. The drum

rotates shortly.

2. The programme duration could be adjusted

accordingly and could increase or decrease.

After further 30 seconds, the water filling starts.

At the end of the load detection, in case of drum
overload, the indicator

is flashing in the

display:
In this case, for 30 seconds, it is possible to pause

the appliance and remove the exceeding garments.
Once removed the exceeding garments, touch the
Start/Pause

button to start the programme

again. The AutoAdjust phase can be repeated up to

three times (see point 1).
Important! If the laundry amount will not be

reduced, the washing programme starts anyway,

despite the overload. In this case, it will be not

possible to guarantee the best washing results.

About 20 minutes after the programme

start, the programme duration could

be adjusted again depending on the

capacity of water absorption of the

fabrics.

The AutoAdjust detection is carried

out with complete washing

programmes only and if the

programme duration has not been

reduced by means of the Time

Manager button.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS
When the programme is running, you can change

only some options:
1. Touch the Start/Pause

button.

The related indicator flashes.

2. Change the options. The given information in

the display changes accordingly.

3. Touch the button Start/Pause

again.

The washing programme continues.

CANCELLING A RUNNING PROGRAMME
1. Press the button On/Off to cancel the

programme and to deactivate the appliance.

2. Press the button On/Off again to activate the

appliance.

If the AutoAdjust System has

completed and the water filling has

already started, the new programme

starts without repeating the

AutoAdjust System. The water and

the detergent are not drained out in

order to avoid waste. The display

shows the maximum duration of the

programme, updating it about 20

minutes after the starting of the new

programme.

There is also an alternative way of cancelling:

1. Rotate the selector knob to the "Reset" position

2. Wait for 1 second. The display shows

Now, you can set a new washing programme.

OPENING THE DOOR - ADDING GARMENTS

If the temperature and level of the

water in the drum are too high and/or

the drum is still rotating you should not

open the door.

While a programme or the delay start operates, the

appliance door is locked. The display shows the
indicator

1. Touch the Start/Pause

button.

Содержание ZWD11683NS









































Результаты поиска

Содержание ZWD11683NS

Отзывы:

Похожие инструкции для ZWD11683NS

Бренды по названию

Популярные бренды

Zanussi ZWD11683NS, Руководство пользователя

Результаты поиска

Содержание ZWD11683NS

Отзывы:

Похожие инструкции для ZWD11683NS

Бренды по названию

Популярные бренды