2. Remove the cardboard top and the polystyrene
packaging materials.
3. Open the door. Remove all the items from the
drum .
4. Put the front polystyrene packaging element on
the floor under the appliance. Carefully put
down the appliance onto its rear side.
5. Remove the polystyrene protection from the
bottom. Put the appliance back into an upright
position.
1
2
6. . Remove the power supply cable and the drain
hose from the hose holders.
It is possible to see water flowing
from the drain hose. This is
because the washing machine has
been tested at the factory.
7. Remove the three transit bolts and pull out the
plastic spacers.
8. Put the plastic caps, that you find in the user
manual bag, in the holes.
6
