Zanussi ZWD11683NS Скачать руководство пользователя страница 35

Страница: 35 / 40

POSSIBLE FAILURES

Problem

Possible solution

The programme does not

start.

• Make sure that the mains plug is connected to the mains socket.

• Make sure that the appliance door is closed.

• Make sure that there is no damaged fuse in the fuse box.
• Make sure that the Start/Pause

has been touched.

• If the delay start is set, cancel the setting or wait for the end of

countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected programme.

The appliance does not fill

with water properly.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too low. For

this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or bends.

• Make sure that the connection of the water inlet hose is correct.

• Make sure that the filter of the inlet hose and the filter of the valve

are not clogged. Refer to 'Care and cleaning'.

The appliance fills with wa-

ter and drains immediately

• Make sure that the drain hose is in the correct position. The hose

may be positioned too low. Refer to "Installation instruction".

The appliance does not

drain the water.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the filter, if nec-

essary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without drain

phase.

• Set the drain programme if you set an option which ends with water

in the tub.

The spin phase does not

operate or the washing cy-

cle lasts longer than usual.

• Set the spin programme.

• Make sure that the drain filter is not clogged. Clean the filter, if nec-

essary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin phase again.

This problem may be caused by balance problems.

There is water on the floor.

• Make sure that the couplings of the water hoses are tight and there

is not water leakages.

• Make sure that the water inlet hose and the drain hose have no

damages.

• Make sure you use the correct detergent and the correct quantity of

it.

You cannot open the appli-

ance door.

• Make sure that a washing programme that ends with water in tub,

has been selected.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appliance. Contact

the Authorised Service Centre.

If you need to open the door, please read carefully "Emergency

door opening".

Содержание ZWD11683NS









































Результаты поиска

Содержание ZWD11683NS

Отзывы:

Похожие инструкции для ZWD11683NS

Бренды по названию

Популярные бренды

Zanussi ZWD11683NS, Руководство пользователя

Результаты поиска

Содержание ZWD11683NS

Отзывы:

Похожие инструкции для ZWD11683NS

Бренды по названию

Популярные бренды