15
The Hinged Grill
This appliance is supplied with a hinged grill
element, to enable you to clean the roof of the
oven easily.
Before proceeding ensure the oven
is cool and is isolated from the
electricity supply.
1. Undo the screws which hold the grill in place
(see Fig. 7). When doing this operation for
the first time, we recommend using a
screwdriver.
2. Then gently pull the grill downward to allow
access to the oven roof (Fig.7).
3. Clean the oven roof with a suitable cleaner
and wipe dry before replacing the hinged
grill element.
4. Gently push up the grill element into place
and firmly screw into place the holding nuts.
Ensure the grill holding nuts are
firmly in place to avoid the grill
falling down when in use.
Before any cleaning switch the
oven off and let it cool down.
Never use steam or steam
machines to clean the appliance.
Important! Before carrying out
maintenance and cleaning
operations, make sure that your
oven is disconnected from the
mains power supply.
Cleaning must be carried out after the oven
has cooled down. Wash the enamelled parts
with lukewarm water and detergent. Do not
use abrasive products, such as steel wool
pads, acids etc. since these could damage
the various surfaces. Rinse stainless steel
parts with water after use, and dry them with
a soft cloth or chamois leather.
In the case of persistent stains, you can
use normal non-abrasive detergents or
products specific for stainless steel readily
available on the market. Another alternative
is a drop of hot vinegar. When cleaning the
oven door with the glass top cover use just
hot water, taking care to avoid using coarse
cloths or abrasive products.
The hot acids of fruit (e.g. Iemons, stewed
prunes, etc.) leave difficult-to-remove stains
on the enamelled surfaces; this inconvenient
may remove enamel gloss, but, it does not
impair oven operation.
Clean the oven thoroughly after use; in this
way it will be possible to remove cooking
residuals more easily, thus avoiding these
from burning the next time the oven is used.
Models in stainless steel or aluminium:
We recommend to clean the oven door using
only a wet sponge and dry it up after cleaning
with a soft cloth.
Never use steel wool, acids or abrasive
products as they can damage the oven
surface.
Clean the oven control panel following the
same precautions.
Cleaning and Maintenance
Fig. 7
