16
Oven door cleaning
For a better cleansing of the oven door, you are
suggested to remove it from the appliance with
the following procedure:
1. Open the oven door completely;
2. Find the hinges linking the door to the
oven (Fig. 8);
3. Unlock and turn the small levers located
on the two hinges (Fig. 9);
4. Handle the door by its left- and right-hand
sides, then slowly turn it towards the oven
until it is half-closed (Fig.10);
5. Gently pull the oven door off its site
(Fig.10);
6. Place it on a steady plan.
Clean the oven door glass with warm water
and a softh cloth only. After cleaning,
assemble the door again by carrying out the
procedure described above backwards. When
the two small levers are placed again on the
hinges, the door will have been accurately fit.
Replacing the oven light
If the oven bulb needs replacing, it must
comply with the following specifications:
Power, 15 or 25 W; Voltage, 230 V (50 Hz);
Temperature Rating of 300 °C; Thread type: E14.
These bulbs are available from your local
Service Force Centre.
To replace the faulty bulb (Fig. 11):
1.
Ensure the oven is disconnected from
the electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with
the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
Fig. 10
Fig. 9
Fig. 8
Fig. 11
