Problem
Possible cause
Remedy
You want to activate the True
Fan Cooking function, but the
indicator of the Plus Steam
button is on.
The True Fan Cooking PLUS
function operates.
Push the Plus Steam button
to stop the True Fan Cook-
ing PLUS function.
You want to activate the clean-
ing function, but the display
shows "C4".
The Plus Steam button is
pressed in.
Press the Plus Steam button
again.
The water in the cavity em-
bossment does not boil.
The temperature is too low.
Set the temperature at least to
110 °C.
Refer to “Hints and tips” chap-
ter.
The water comes out of the
cavity embossment.
There is too much water in the
cavity embossment.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct
amount of water to the cavity
embossment. Refer to the spe-
cific procedure.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
The demo mode is activated.
1. Deactivate the oven.
2. Press and hold the button
.
3. The first digit on the dis-
play and Demo indicator
start to blink.
4. Enter the code 2468 by
pressing the buttons or
to change the values
and press to confirm.
5. The next digit starts to
blink.
6. Demo mode deactivates
when you confirm the last
digit and the code is cor-
rect.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
27