Zanussi ZOG10311, Руководство пользователя

Страница: 20 / 24

Control the flame. If the flame goes out, do the
procedure again. There must be a small regular
flame on the oven burner crown.
The manufacturer objects liability if you
do not obey to this safety measures.
Building in
• Only set up the appliance in a kitchen or in a
kitchen-dining room. Do not set up the
appliance in a bathroom or a bedroom.
• You can install the appliance "built-in" or
"built-under". The dimensions of the built-in
cabinet must agree with the related
illustrations.
min. 550
589
594
114
16
573
590
min. 560
594
558
21 548
65 cm 2
x2
130 cm 2
110
50
3
5
min. 550
110
600
min. 560
558
589
594
114
16
573
594
21 548
65 cm
2
x2
130 cm 2
min. 4 mm
3
5
• There must be a clearance of minimum 4 mm
between the top surface of the appliance
and the inner top of the cabinet.
• When you install the appliance "built-under"
(below a hob), install the hob before the
oven unit.
• The materials must be resistant to a
temperature increase of minimum 60 °C
above the ambient temperature.
• There must be a continuous air supply
around the oven in order to not have the
oven become too hot.
• For correct operation, the oven cabinet must
have a minimum opening of 130 cm² in the
front or on the sides (a minimum of 65 cm²
for each side). The manufacturer
recommends a 130 cm² opening in the front
for a brick cabinet and a 65 cm² opening for
each side for a wooden cabinet.
• When you install a hob above the oven,
make different electrical connections for the
hob and for the oven.
Only make connections with correct cables
for the power supplied.
Make sure that after the installation
there is easy access to the
appliance if repairs or maintenance
are necessary.
Securing the appliance to the cabinet
A
B
Electrical installation
The manufacturer is not responsible
if you do not follow the safety
precautions from the Safety
chapters.
20 www.zanussi.com