MAINTENANCE
Unplug the appliance before carrying out
any maintenance operation.
Periodic cleaning
Never use metal objects for cleaning your
appliance as it may get damaged.
Clean the inside with warm water and
bicarbonate of soda.
Rinse and dry thoroughly.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all
accessories;
leave the door ajar to allow air to circulate to
prevent unpleasant smells.
Interior light
The light bulb inside the refrigerator
compartment can be reached as follows:
■
unscrew the light cover securing screws;
■
unhook the moving part by pressing it as
shown in the figure.
If the door is open and the light does not come
on, check that the bulb is properly screwed in; if
it still does not work, replace the bulb with one
of the same power.
The maximum rating is shown on the light
cover.
34
GB
CUSTOMER SERVICE AND SPARE PARTS
GB
If the appliance is not functioning properly,
check that:
the plug is firmly in the wall socket and the
mains power switch is on;
there is an electricity supply (find out by
plugging in another appliance);
the thermostat knob is in the correct position.
If there are water drops on the bottom of the
cabinet,
check that the defrost water drain opening is not
obstructed (see “Defrosting” section).
If your appliance is still not working properly
after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the model
and serial number of your appliance which
can be found on the guarantee certificate or
on the rating plate located inside the
appliance, on the bottom left-hand side.
D411
Fig. 12
