background image

WARNINGS

General Safety

This appliance is designed to be operated by
adults. Children should not be allowed to
tamper with the controls or play with the
product.

It is dangerous to alter the specifications or
modify this product in any way.

Care must be taken to ensure that the
appliance does not stand on the electrical
supply cable.

Before any cleaning or maintenance work is
carried out, be sure to switch off and unplug
the appliance.

This appliance is heavy. Care should be taken
when moving it.

Ice lollies can cause frost burns if consumed

straight from the appliance.

Service / Repair

Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.

This appliance should be serviced by an
authorized Service Centre, and only genuine
spare parts should be used.

Under no circumstances should you attempt
to repair the appliance yourself. Repairs
carried out by inexperienced persons may
cause injury or more serious malfunctioning.
Refer to your local Service Centre, and
always insist on genuine spare parts.

Use

The domestic refrigerators and freezers are
designed to be used specifically for the
storage of edible foodstuffs only.

Frozen food must not be re-frozen once it has
been thawed out.

Manufacturers’ storage recommendations
should be strictly adhered to. Refer to
relevant instructions.

The inner lining of the appliance consists of

channels through which the refrigerant
passes. If these should be punctured this

would damage the appliance beyond repair
and cause food loss. DO NOT USE SHARP
INSTRUMENTS to scrape off frost or ice.
Frost may be removed by using the scraper
provided. Under no circumstances should
solid ice be forced off the liner. Solid ice
should be allowed to thaw when defrosting
the appliance. See defrost instructions.

Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the
container, which may cause it to explode,
resulting in damage to the appliance. 

Installation

There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss.
See installation instructions.

Parts which heat up should not be exposed.
Wherever possible the back of the product
should be against a wall.

If the appliance has been transported
horizontally, it is possible that the oil
contained in the compressor flows in the
refrigerant circuit. It is advisable to wait at
least two hours before connecting the
appliance to allow tlıe oil to flow back in the
compressor.

Environment Protection

This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. The appliance shall not be
discarded together with the urban refuse
and rubbish. Avoid damaging the cooling
unit, especially at the rear near the heat
exchanger. Information on your local
disposal sites may be obtained from your
municipal authorities. The materials used
on this appliance marked with the symbol

are recyclable.

27

GB

It is most important that this instruction book should be retained with the appliance for future reference. 
Should the appliance be sold or transferred to another owner, or should you move house and leave the
appliance, always ensure that the book is supplied with the appliance in order that the new owner can be
acquainted with the functioning of the appliance and the relevant warnings.
These warnings are provided in the interest of safety. You must read them carefully before installing or
using the appliance.

Содержание ZFC194-1










Отзывы: