Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
Before first use
1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
Adjusting the water softener
Water hardness
Electronic
adjust-
ment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
> 24
> 40
> 4.2
28
5
18- 24
32 - 40
3.2 - 4.2
22 - 28
4
12- 18
19 - 32
2.1 - 3.2
13 - 22
3
1)
4 - 12
7 - 19
0.7 - 2.1
5 - 13
2
< 4
< 7
< 0.7
< 5
1
2)
1)
Factory position.
2)
Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the ap-
pliance. Make sure that the appliance is in
setting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
2. Press and hold function buttons (
B
) and
(
C
) at the same time until the indicators
above function buttons (
A
), (
B
) and (
C
)
start to flash.
3. Press function button (
A
).
• The indicators above function buttons
(
B
) and (
C
) go off.
• The indicator above function button (
A
)
continues to flash.
• The display shows the current setting of
the water softener, e.g.
= level 5.
4. Press function button (
A
) again and again
to change the setting.
5. Deactivate the appliance to confirm the
setting.
Filing the salt container
1
2
5
www.zanussi.com
Содержание ZDM16301SA
