background image

• Do not put in the appliance items made of

wood, horn, aluminium, pewter and copper.

• Do not put in the appliance items that can

absorb water (sponges, household cloths).

• Remove remaining food from the items.

• Make soft the remaining burned food on the

items.

 

• Put hollow items (cups, glasses and pans)

with the opening down.

• Make sure that cutlery and dishes do not

bond together. Mix spoons with other cut-
lery.

• Make sure that glasses do not touch other

glasses.

• Put small items in the cutlery basket.

• Put light items in the primary basket. Make

sure that the items do not move.

• Make sure that the spray arm can move free-

ly before you start a programme.

Using salt, rinse aid and detergent

• Only use salt, rinse aid and detergent for

dishwasher. Other products can cause dam-
age to the appliance.

• The rinse aid helps, during the last rinsing

phase, to dry the dishes without streaks and
stains.

• Combi detergent tablets contain detergent,

rinse aid and other added agents. Be sure
that these tablets are applicable to the water
hardness in your area. Refer to the instruc-
tions on the packaging of the products.

• Detergent tablets do not fully dissolve with

short programmes. To prevent detergent
residues on the tableware, we recommend
that you use the tablets with long pro-
grammes.

Do not use more than the correct quantity
of detergent. Refer to the instructions on

the detergent packaging. The instructions on
the packaging usually refer to large dishwash-
ers (12 settings).

Before starting a programme

Make sure that:

• The filters are clean and correctly installed.

• The spray arm is not clogged.

• The position of the items in the baskets is

correct.

• The programme is applicable for the type of

load and for the degree of soil.

• The correct quantity of detergent is used.

• There is dishwasher salt and rinse aid (un-

less you use combi detergent tablets).

• The cap of the salt container is tight.

Care and cleaning

Warning!

 Before maintenance, deactivate

the appliance and disconnect the mains

plug from the mains socket.

Dirty filters and clogged spray arm de-
crease the washing results.

Make a check regularly and, if necessary, clean
them.

 

9

www.zanussi.com

Содержание ZDM16301SA

















Отзывы: