background image

A

3

Fill the detergent dis-
penser (A) with de-
tergent.

B

4

If you use a washing
programme with pre-
wash phase, put
more detergent in the
prewash detergent
compartment (B).

A

5

6

Using the combi detergent tablets

When you use tablets, that contain salt and
rinse aid, do not fill the salt container and the
rinse aid dispenser.

1. Adjust the water softener to the lowest lev-

el.

2. Set the rinse aid dispenser to the lowest

position.

If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:

1. Press the on/off button to activate the ap-

pliance.

2. Set the water softener to the highest level.

3. Make sure that the salt container and the

rinse aid dispenser are full.

4. Start the shortest programme with a rinsing

phase, without detergent and without
dishes.

5. Adjust the water softener to the water

hardness in your area.

6. Adjust the released quantity of rinse aid.

Setting and starting a programme

Setting mode

The appliance must be in setting mode to ac-
cept some operations.
The appliance is in setting mode when, after
the activation:

• All the programme indicators are on.
If the control panel shows other conditions,
press and hold function buttons (

B

) and (

C

) at

the same time until the appliance is in setting
mode.

Starting a programme without delay start

1. Open the water tap.

2. To set a programme, keep the appliance

door ajar.

3. Press the on/off button to activate the ap-

pliance.

4. Make sure that the appliance is in setting

mode.

5. Press the button of the programme you

want to set.

• The programme duration flashes in the

display.

• The related programme indicator comes

on.

• The wash indicator comes on.

6. Close the appliance door. The programme

starts.

• The display shows the programme dura-

tion that decreases with steps of 1 mi-
nute.

• The wash indicator stays on.

Starting a programme with delay start

1. Set the programme.

2. Press the delay button again and again until

the display shows the delay time you want
to set (from 1 to 19 hours).

• The delay time flashes in the display.

• The delay indicator comes on.

 

7

www.zanussi.com

Содержание ZDM16301SA

















Отзывы: