Zanussi ZDM11301WA, Руководство пользователя

Страница: 5 / 40

4. Open the water tap.
5. Processing residues can stay in the appli-
ance. Start a programme to remove them.
Do not use detergent and do not load the
baskets.
Adjusting the water softener
Water hardness
Electronic
adjust-
ment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
> 24 > 40 > 4.2 > 29 10
22 - 24 39 - 40 3.9 - 4.2 27 - 29 9
20 - 22 35 - 39 3.5 - 3.9 25 - 27 8
18 - 20 32 - 35 3.2 - 3.5 23 - 25 7
16 - 18 28 - 32 2.8 - 3.2 20 - 23 6
13 - 16 23 - 28 2.3 - 2.8 17 - 20
5
1)
10 - 13 18 - 23 1.8 - 2.3 13 - 17 4
7 - 10 12 - 18 1.2 - 1.8 9 - 13 3
4 - 7 7 - 12 0.7 - 1.2 5 - 9 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
The water softener is set at the factory at
level 5.
1. Press and hold the start/cancel button.
Turn the programme knob clockwise until
the programme marker agrees with the
first washing programme on the control
panel.
2. Release the start/cancel button when the
on/off indicator light and the start/cancel
indicator light start to flash.
– At the same time, the end indicator light
flashes to show the level of the water
softener.
Example:
5 flashes, pause, 5 flashes, pause, etc...
= level 5
3. Press the start/cancel button one time to
increase the water softener level by one
step.
The end indicator light shows the new lev-
el.
4. Turn the programme knob to the off posi-
tion to save the operation.
Filing the salt container
1 2
5
www.zanussi.com