background image

RINSE AND HOLD 

programme light

flashing very fast 

The dishwasher does not fill. 

The water tap is shut.
Open the water tap. 
Switch off the dishwasher, then switch it back on
and start the wash programme. If the alarm signal
reappears, call the Technical Service Centre. 

No water from the mains supply.
Wait until the water supply is restored.
Switch off the dishwasher, then switch it back on 
and start the wash programme. If the alarm signal 
reappears, call the Technical Service Centre. 

The water feed hose is kinked or squashed.
Reposition the hose (see instructions for connection 
to the mains water supply). 
Switch off the dishwasher, then switch it back on
and start the wash programme. If the alarm signal 
reappears, call the Technical Service Centre. 

The small filter in the water feed hose is
blocked. 
Shut the water tap, unscrew the feed hose and
thoroughly clean the small filter. Screw the hose 
back on and open the water tap. 
Switch off the dishwasher, then switch it back on 
and start the wash programme. If the alarm signal 
reappears, call the Technical Service Centre. 

INTENSIVE 70° programme 

light 

flashing very fast 

The filters are blocked (see MAINTENANCE section). 
Switch off the dishwasher, then switch it back on 
and start the wash programme. If the alarm signal 
reappears, call the Technical Service Centre. 

QUICK WASH 

programme light 

flashing very fast 

The dishwasher does not empty. 

The drain hose is kinked.
Eliminate the kink (see instructions for connection to 
the water drain). 
Switch off the dishwasher, then switch it back on 
and start the wash programme. If the alarm signal 
reappears, call the Technical Service Centre. 

The drain in the sink is blocked.

Clear the sink drain pipe. 
Switch off the dishwasher, then switch it back on
and start the wash programme. If the alarm signal
reappears, call the Technical Service Centre. 

The length of the drain hose is incorrect.
Carefully follow the instructions for «Connection to
the water drain». 
Switch off the dishwasher, then switch it back on
and start the wash programme. If the alarm signal 
reappears, call the Technical Service Centre. 

The wall discharge pipe does not have a
breather hole. 
Consult a qualified technician.

NORMAL

65° or ECO 

50°

programme light flashing very fast. 

Switch off the dishwasher, then switch it back on
and start the wash programme. If the alarm signal
reappears, call the Technical Service Centre. 

Besides, if: 

The machine will not start 

The door has not been properly closed. 

The plug is not properly inserted in the power socket. 

There is no current at the socket. Check the fuse. 

The dishes are not clean (poor wash) 

The baskets are too full. 

The dishes have not been arranged properly. 

The spray arms do not rotate. 

The spray arm holes are clogged. 

The water inlet funnel in the centre of the upper 
basket is covered by dishes. 

The end of the drain hose is submerged in waste
water (in the sink). 

The filters are clogged. 

The filters are not in position. 

Not enough detergent has been used or it is unsuit-
able. 

The detergent is old or has gone hard. 

The salt container cap is not properly closed.

The washing programme selected is too gentle.

SERVICING

PRA22GB

28

Certain problems are due to lack of simple maintenance or oversights and can be solved easily without having to
call out an engineer. Therefore before calling the Service, consult the check list here below. 

This dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any

problems.

If the end of programme indicator light 

on the control panel is Off and you see the following signals:

Содержание ZD852I

















Отзывы: