Zanussi ZCI68300WA, Руководство пользователя

Страница: 8 / 28

After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
To change the time, press again and
again until the indicator for the Time of
Day function flashes. You must not set the Du-
ration
or End function at the same time.
Preheating
Set an oven function and maximum tempera-
ture and run an empty oven for 45 minutes, to
burn off any residue from the cavity surface.
Accessories can become hotter than in normal
use. During this period an odour can be emit-
ted. This is normal. Make sure the room is well
ventilated.
Preheat the two ovens. Heat up one oven at a
time.
Hob - Daily use
Warning! Refer to the Safety chapters.
Control panel layout
1
2
3
4
5 6 7
Use the sensor fields to operate the appliance. The indicators
and display show which function operates.
Sensor field Function
1
The timer display To show the time in minutes.
2
To set a cooking zone.
3
/
To increase or decrease the time.
4
To lock / unlock the control panel.
5
To activate the Power function.
6
To activate and deactivate the STOP+GO function.
7
A heat setting display To show the heat setting.
8
www.zanussi.com