Zanussi LIBERO IWOKEC-1P/1ZT Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 75

background image

2

LIBERO LINE WOK INDUCTION

Document made by Product Care

– Technical Training & Service – Vallenoncello PN/Italy

All the images and information of this document are property of ©Electrolux Professional Spa. This document
and all its contents cannot be copied or used, in part or entirely without the written authorization of Electrolux
Professional Spa.

REVISIONS UPDATE:

EDITION

DESCRIPTION

DATE

1

First edition of Service Manual

APRIL. 2021

Foreword

The service manual (here in after Manual) provides the engineer with information necessary for correct

and safe care of the machine (here in

after “machine“, “appliance“ or “unit”).

The following instructions are intended to maintain the machine performance and to preventing injury to per-
sons and animals and damage to property due to improper operating procedures.

All persons involved in machine transport, installation, commissioning and maintenance, repair and disassem-
bly must refer to the content of this manual before carrying out the various operations. This, in order to avoid
wrong and improper actions that could compromise the machine's integrity or endanger people.

If, after reading this manual, there are still doubts regarding machine use, do not hesitate to contact the Man-
ufacturer or the Customer Care to receive prompt and precise assistance for better operation and maximum
efficiency of the machine. During all stages of machine assessment, always respect the current regulations on
safety, work hygiene and environmental protection. It is the user's responsibility to make sure the machine is
started and operated only in optimum conditions of safety for people, animals and property.

IMPORTANT

•

The manufacturer declines any liability for operations carried out on the appliance without respecting the
instructions given in this manual as well as for operations carried out by the user without respecting the
instructions given in the user manual.

•

The manufacturer reserves the right to modify the appliances presented in this publication without notice;
manufacturer’s relevant technical bulletins should be used as integration(s)/addendum(s).

•

No part of this manual may be reproduced without the consent of the manufacturer

•

This manual is available in digital format by:

contacting the reference customer care;

downloading the latest and up to date manual/technical bulletin(s) on the web site:
“www.electrolux.com/professional“.

The manual must always be part of the documentation available when servicing the machine.

Doc. N. 059785XW00

Edition 1

– 04-2021

«
1
2
3
4
...
»

Содержание LIBERO IWOKEC-1P/1ZT












































































Отзывы:

Нет отзывов

Похожие инструкции для LIBERO IWOKEC-1P/1ZT

Бренд: Jata Страницы: 24

Distinctive DECT304

Бренд: Dacor Страницы: 12

Distinctive DCT305

Бренд: Dacor Страницы: 4

Discovery EG366

Бренд: Dacor Страницы: 20

Бренд: Dacor Страницы: 4

Electric Cooktops

Бренд: Jenn-Air Страницы: 28

Бренд: Mac's BBQ Страницы: 12

Бренд: Omega Страницы: 6

Бренд: Zline Страницы: 20

Бренд: Radiola Страницы: 44

Бренд: Oster Страницы: 31

Бренд: Optimum Страницы: 9

Бренд: Bond Страницы: 24

Бренд: IKEA Страницы: 16

Бренд: TriStar Страницы: 48

Бренд: Jenn-Air Страницы: 32

Professional VESC5304B

Бренд: Viking Страницы: 12

Бренд: CASO DESIGN Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды