Zanussi LIBERO IWOKEC-1P/1ZT Скачать руководство пользователя страница 8

Страница: 8 / 75

LIBERO LINE WOK INDUCTION

1.2 SAFETY INFORMATION/PRECAUTIONS

•

Risks mainly of a mechanical, thermal and electrical nature exist in the machine. Where possible the risks

have been neutralized:
–

directly, by means of adequate design solutions.

–

indirectly by using guards, protection and safety devices.

•

During maintenance several risks remain, as these could not be eliminated, and must be

neutralized by adopting specific measures and precautions.
•

Do not carry out any checking, cleaning, repair or maintenance operations

on moving

parts. Workers must be informed of this prohibition by means of clearly visible signs.
•

To guarantee machine efficiency and correct operation, periodical maintenance must be carried

out according to the instructions given in this manual.
•

Make sure to periodically check correct operation of all the safety devices and the insulation of

electrical cables, which must be replaced if damaged.
•

Extraordinary machine maintenance operations must only be carried out by specialized Technicians

provided with all the appropriate personal

protection equipment (safety shoes, gloves, glasses,

overalls, etc.), tools, utensils and ancillary means.
•

Never operate the machine, removing, modifying or tampering with the guards, protection or safety de-

vices.
•

Before carrying out any operation on the machine, always consult the manual which gives the correct

procedures and contains important information on safety.

Содержание LIBERO IWOKEC-1P/1ZT












































































Результаты поиска

Содержание LIBERO IWOKEC-1P/1ZT

Отзывы:

Похожие инструкции для LIBERO IWOKEC-1P/1ZT

Бренды по названию

Популярные бренды

Zanussi LIBERO IWOKEC-1P/1ZT, Руководство по обслуживанию

Результаты поиска

Содержание LIBERO IWOKEC-1P/1ZT

Отзывы:

Похожие инструкции для LIBERO IWOKEC-1P/1ZT

Бренды по названию

Популярные бренды