8
Use
60ºC
40ºC
90ºC
30ºC
900
700
500
FE 904 NN
/
1
3
2
4
5
6
9
8
7
Control panel
1 ON/OFF button
Press this button to switch the washing machine on.
Press the ON/OFF button again to switch the
machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It
lights up when you press the button, and goes out
when you press it again.
3 FABRIC button
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The washing machine will propose a temperature and
automatically select the maximum spin value
provided for the programme you have chosen. You
can change these values by operating buttons 4 and
5.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be washed
at a temperature different from the one proposed by
the washing machine. The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics and
wool/hand wash.
By selecting position
the machine will wash with
cold water. To be used for extremely delicate items,
such as curtains.
5 SPIN SPEED BUTTON
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine. The relevant light will light up.
Maximum speeds are:
• for cotton, synthetic fabrics and wool/hand wash:
for cotton:
900 rpm;
• for delicate fabrics: 700 rpm,
SPIN SUPPRESSION position
Select this option when you have to wash
particularly delicate items in order to exclude all the
spinning phases. The machine will add 3 rinses for
cottons and 1 rinse for synthetics.
RINSE HOLD position
: when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the cycle the door is locked, the light
of the START/PAUSE button
goes off, the pilot
lights
and
remain lit, to indicate that the
water must be drained.
To complete the cycle, choose one of the following
options:
•
Drain
:
Press the SKIP/RESET button once, all the leds are
off, then press
button in order to select the
desired programme. If you wish to drain
or to
spin
press SKIP/RESET button until the led of
the desired function goes on.
You can change the spin speed by means of
button and then depress START/PAUSE button
.
Important!
If you accidentally press the RESET
button more than once, the programme is cancelled.
To cause the washing machine to drain the water,
select any washing programme by means of the
132988210.qxd 22/06/2004 16.19 Pagina 8
