ENGLISH
15
9. Start the programme
Press the START/PAUSE button
. The relevant
light will stop flashing and only the light relevant to
the phase that is in progress will remain lit.
10. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle
from the
beginning
.
If it is necessary to drain the water in order to
change the programme in progress, proceed as
follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the SKIP/RESET button
repeatedly, until
only the DRAIN light
remains lit;
• press the START/PAUSE button again.
When the water has been drained, you may select a
new programme and press the START/PAUSE
button to start it.
7. Select the SPIN SPEED
, the
SPIN SUPPRESSION
or RINSE
HOLD option
Press the SPIN SPEED button
repeatedly, in
order to select the desired spin speed, SPIN
SUPPRESSION option
or the RINSE HOLD
option
. The relevant light will light up.
If you select the RINSE HOLD option
, the
machine will stop at the end of the programme with
the water still in the tub.
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option
.
Select the ECONOMY option
, if your laundry is
only slightly soiled.
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE option
.
The relevant light illuminates.
Press the OPTIONS button so as to cause one light
to light up.
900
700
500
132988210.qxd 22/06/2004 16.19 Pagina 15
