ZANKER KOU10311XK, Руководство пользователя

Страница: 13 / 32

Building Under
Caution! Only a qualified and competent
person must do the installation of the
appliance. If you do not contact a
qualified or competent person, the
guarantee becomes invalid if there is
damage.
Before you install the appliance, fit it with the applicable
hob from the table.
Type Maximum power
KAV6041 6500 W
KEV6041 6000 W
KEV6043 7600 W
KEV6046 7400 W
Electrical connection with the hob
The hob connection socket is at the top of the oven
cabinet. The hob has connection leads for the cooking
zones and the ground cable. The leads have plug-in
connectors. To connect the hob to the oven, plug the
connectors into the correct oven sockets. The design of
the plugs and sockets prevents incorrect connections.
Building In
589
598
594
114
19
21 540
570
558 min. 550
20
600
min. 560
3
9
Securing the appliance to the cabinet
A
B
Electrical installation
The manufacturer is not responsible if
you do not follow the safety precautions
from the Safety chapters.
This appliance is supplied without a main plug and a
main cable.
Cable
Cable types applicable for installation or replacement:
H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-
F (T90), H05 BB-F
For the section of the cable refer to the total power on
the rating plate.
Connecting the terminal board
The appliance has a six-pole terminal board. The
jumpers (bridges) are set for operation on a 400 V
three-phase with a neutral wire.
1 = 45 mm
2 = 45 mm
3 = 60 mm
4 = 60 mm
= 70 mm
1 2 3 4 5
L 1 – 2 – 3 = phase cables
N 4 = neutral cable
= earth cable
If the mains voltage is different, rearrange the jumpers
on the terminal board (refer to the connection diagram
below). Connect the ground cable to the terminal. After
you connect the supply cable to the terminal board,
attach it with a junction clamp.
13