ZANKER KOB10401XB, Руководство пользователя

Страница: 3 / 40

•
Before carrying out any maintenance, disconnect the appliance from the
power supply.
•
WARNING: Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
•
Do not use the appliance before installing it in the built-in structure.
•
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
glass door since they can scratch the surface, which may result in
shattering of the glass.
•
If the mains power supply cable is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly qualified persons
to avoid an electrical hazard.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the
appliance.
• Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed
footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable place that
meets installation requirements.
• Keep the minimum distance from other appliances
and units.
• Before mounting the appliance, check if the oven
door opens without restraint.
• The appliance is equipped with an electric cooling
system. It must be operated with the electric power
supply.
Cabinet minimum height
(Cabinet under the work-
top minimum height) 590 (600) mm
Cabinet width 560 mm
Cabinet depth 550 (550) mm
Height of the front of the
appliance 598 mm
Height of the back of the
appliance 579 mm
Width of the front of the
appliance 594 mm
Width of the back of the
appliance 558 mm
Depth of the appliance 561 mm
Built in depth of the appli-
ance 540 mm
Depth with open door 1007 mm
Ventilation opening mini-
mum size. Opening placed
on the bottom rear side 560x20 mm
Mains supply cable length.
Cable is placed in the right
corner of the back side 1100 mm
Mounting screws 4x25 mm
Electrical connection
Warning! Risk of fire and electric shock.
• All electrical connections should be made by a
qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate
are compatible with the electrical ratings of the
mains power supply.
• Always use a correctly installed shockproof socket.
3