Heat setting displays
Display
Description
The cooking zone is deactivated.
The Keep Warm function operates.
-
The cooking zone operates.
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the cooking
zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Switch-Off operates.
Residual heat indicator
Warning!
The risk of burns from residual
heat!
The induction cooking zones make the heat necessary
for cooking directly in the bottom of the cookware. The
glass ceramic is hot from the heat of the cookware.
Daily use
Activation and deactivation
Touch for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated ( ).
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). An acoustic signal sounds some time and the
appliance deactivates. Remove the object or clean
the control panel.
• The appliance becomes too hot (e.g. when, a sauce-
pan boils dry). Before you use the appliance again,
the cooking zone must be cool.
• You use incorrect cookware. The symbol comes
on and the cooking zone deactivates automatically
after 2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
appliance deactivates. See below.
• The relation between heat setting and times of the
Automatic Switch Off function:
•
, - — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to de-
crease the heat setting. The display shows the heat
setting. Touch and at the same time to deacti-
vate the cooking zone.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This func-
tion sets the highest heat setting for some time (see the
diagram), and then decreases to the necessary heat
setting.
20
