ZANKER KDV10031FA, Руководство пользователя

Страница: 40 / 48

Troubleshooting
Warning! Improper repair of the
appliance may pose a danger to the
safety of the user. Any repairs must be
performed by qualified personnel.
The majority of problems that may occur can be
solved without the need to contact an Authorised
Service Centre.
Refer to the below table for information on possible
problems.
With some problems, the lights related to the
programme buttons flash intermittently to indicate a
malfunction and the alarm code.
Problem and alarm code Possible cause and solution
You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.
The programme does not start. • Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for the end of the count-
down.
• The appliance recharges the resin inside the water softener. The duration
of the procedure is approximately 5 minutes.
The appliance does not fill with wa-
ter.
•
The lights related to the pro-
gramme buttons flash 1 time in-
termittently.
• An acoustic signal sounds inter-
mittently.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too low. For this
information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the
water.
•
The lights related to the pro-
gramme buttons flash 2 times
intermittently.
• An acoustic signal sounds inter-
mittently.
• Make sure that the sink spigot is not clogged.
• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.
40