ZANKER KDV10031FA, Руководство пользователя

Страница: 35 / 48

3. If the programme has a prewash phase, put a small
quantity of detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid locks into
position.
How to select and start a programme
1. Press the button dedicated to the programme you
want to set.
The light related to the button flashes.
2. Activate Extra power if desired.
3. Close the appliance door to start the programme.
How to select and start the programme Pre Rinse
1. To select Pre Rinse, press and hold 30min for 3
seconds.
The light related to the button flashes.
Extra power is not applicable to this
programme.
2. Close the appliance door to start the programme.
How to activate Extra power
1. Select a programme.
2. Press Extra power.
The light related to the button is on.
Extra power is not a permanent option
and must be activated every time before
you start a programme.
It is not possible to activate or deactivate
Extra power while a programme is
running.
Activating Extra power increases the
water and energy consumption as well
as the programme duration.
How to select and start the programme AUTO
1. Press AUTO.
The light related to the button is on.
Extra power is not applicable to this
programme.
2. Close the appliance door to start the programme.
The appliance senses the type of load and adjusts a
suitable wash cycle.
How to delay the start of a programme
You can delay the start of the selected programme by 3
hours.
1. Select a programme.
2. Press
.
The light related to the button is on.
3. Close the appliance door to start the countdown.
During the countdown, it is not possible to change the
programme selection.
When the countdown is complete, the programme
starts.
How to cancel the delay start while the
countdown operates
Press and hold for about 3 seconds.
The appliance returns to the programme selection.
If you cancel the delay start, you have to
select the programme again.
How to cancel a running programme
Press and hold for about 3 seconds.
The appliance returns to the programme selection.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
Opening the door while the appliance operates
Opening the door while a programme is running stops
the appliance. It may affect the energy consumption and
the programme duration. After closing the door, the
appliance continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
The Auto Off function
This function saves energy by switching the appliance
off when it is not operating.
The function comes into operation automatically:
• When the programme is completed.
• After 5 minutes if a programme was not started.
35