ZANKER KDT10001FB, Руководство пользователя

Страница: 24 / 40

Problem Possible solution
There are stains and dry water drops
on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid
selector to a higher position.
• The quality of the rinse aid can be the cause.
The dishes are wet. • The programme does not have a drying phase or has a drying phase
with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
Refer to "Hints and tips" for other
possible causes.
Technical information
Dimensions Width / height / depth (mm) 596 / 818-898 / 555
Electrical connection 1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water 2)
max 60 °C
Capacity Place settings 12
Power consumption Left-on mode (W) 0.50
Power consumption Off-mode (W) 0.50
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to
decrease energy consumption.
Rating Plate
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
Information for test institutes
For all the necessary information for test performance,
send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the
rating plate.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol . Put the
packaging in applicable containers to recycle it. Help
protect the environment and human health and to
recycle waste of electrical and electronic appliances. Do
not dispose appliances marked with the symbol with
the household waste. Return the product to your local
recycling facility or contact your municipal office.
24