ZANKER KDT10001FB, Руководство пользователя

Страница: 20 / 40

• Make sure that there is rinse aid in the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of
load and the degree of soil.
Adding detergent
2
1
20
30
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
Adding multi-tablets
2
1
20
30
• Do not fill the salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest level.
• Set the rinse aid dispenser to the lowest position.
Setting and starting a programme
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
3. Press the programme button until the indicator of the programme you want to set comes on.
4. Close the appliance door to start the programme.
Opening the door while the appliance operates
If you open the door while a programme is running, the appliance stops. When you close the door, the appliance
continues from the point of interruption.
End of the programme
When the programme is completed the indicator is on.
1. Press the on/off button to deactivate the appliance.
2. Close the water tap.
If you do not press the on/off button, after few minutes from the end of the programme all the
indicators go off. This helps to decrease the energy consumption.
20