CINDER 40 PWM Charge Controller User Manual
Zamp Solar
2) Overview
Intro
The Zamp Solar CINDER 40 solar charge controller automatically controls the
attached solar input to charge the connected battery and keep it at optimal battery
health. The CINDER 40 also monitors, regulates and protects the attached solar and
battery components.
Equipped with advanced, high efficiency, pulse width
modulated (PWM) technology and temperature compensation, batteries safely
charge to 100% every time.
PulseTech
Patented PulseTech pulsing technology increases the life of lead-acid batteries.
PulseTech works by removing and hindering the natural sulfation (corrosion) that
occurs in all lead-acid/AGM batteries that eventually leads to a dead battery.
PulseTech patented desulfating technology has been proven to increase the life of
lead-acid/AGM batteries by up to three times their normal life. This technology is
built into the
CINDER
40 and can be turned on for any lead-acid/AGM battery
charging profile.
Bluetooth
Use our Android and iOS apps with our built-in Bluetooth technology to program,
control and monitor your battery(s). Get real-time charging and battery statistics at
the touch of a button on your smart device. Check the history page for long term
performance data and statistics. Program when the load output circuit should turn
on and off and set low voltage disconnects. See
for more details on the
Zamp Solar application.
Load Output Circuit
Power and control DC devices using our Load Output Circuit. The CINDER 40 load
circuit will power devices that run on 12-volt or 24-volt, depending on battery
configuration.
The load circuit is not for use with any DC/AC power inverters. Use our
Android or iOS app to turn this circuit On/Off or program to run at certain times
during the day.
4
