CINDER 40 PWM Charge Controller User Manual
Zamp Solar
History Page
●
System History
Historical Data Options: This button allows you to change the History graph to
any of the following options:
●
Solar Energy Production
●
Max Daily Wattage
●
Max Daily Amperage
●
Wattage Average
●
History Graph
The top buttons can change the time scale of the graph. This can be 7 days, 15
days and 30 days.
●
Records and Statistics
Here you can view any of the following historical statistics:
●
10 Day Total Energy Generation (kWh)
●
30 Day Average Daily Energy Generation (Wh)
●
Maximum Daily Energy Production (Wh)
●
Highest Recorded Amperage (A)
●
Average 10 Day Battery Percentage (%)
●
Average 10 Day Battery Voltage (V)
●
Average 24 Hour Battery Voltage (V)
●
Average 24 Hour Wattage (W)
●
Average 24 Hour Amperage (A)
●
Lowest Battery Voltage (V)
Choose Records and Statistics - This button allows you to change the
displayed Records and Statistics. The order in which these statistics are
presented can also be adjusted here.
Settings Page
●
Set Battery Profile
Select to change the active battery profile. It is very important that you set this
profile to match your battery type. (See
for a description of all the
default profiles.)
Check your specific battery datasheet for recommended absorption and float
voltages.
If the specific values of your battery differ from the default profile, create a
customized profile one of the three Custom Profiles. Follow the steps below to
create a custom profile.
1.
Select an available custom profile.(1-3)
2. Choose a battery type to base this profile on that best matches your
battery type.
3. You will then be taken to a screen where you can edit the absorption
voltage and float voltage according to your battery spec sheet. The
“Float” option allows you to enable or disable the float stage entirely.
4. Once your custom values match those given by your battery
manufacturer, press “set” to enable your new custom profile.
17
