CONDENSATE DRAIN CONNECTION
•
Use standard PVC pipe with NPT connection for the condensate drain. Provide a 'P' trap immediately at the condensate drain connection.
•
Piping has to be sloped away from the unit.
•
Remember to remove the drain hole plug before operating the unit. Avoid bends & elbows.
DUCT CONNECTION
The units can be connected to the ducting in horizontal configuration. Connect ducting using flexible duct connection. The duct should
be properly designed and the drive package should match the required CFM & corresponding external static pressure.
ATTENTION: Avoid abrupt changes in size and/or direction of duct to ensure proper unit performance.
UNIT WEIGHT & WEIGHT DISTRIBUTION
ELECTRIC HEATERS
Electric heater kit is installed in the unit at the supply air opening space.
CABLE SIZE
•
All wiring should be in accordance with local and NEC standards.
•
Before making any connection, check the electric power supply, it must have the same characteristics as what is displayed in the nameplate.
•
For selecting cable size, refer to wire ampacity table at different MCA (Minimum Circuit Amps) provided in unit electrical data, which
is listed as a guideline.
•
Wiring connection to the unit must have suitable insulation of a minimum temperature of 90
0
C.
MODEL
NUMBER
WEIGHT (Kg.)
J
K
M
L
PS036
PS048
PS060
PS075
PS090
PS100
PS120
PS180
PS215
PS240
PS300
PS360
51
57
62
70
94
96
97
150
93
95
195
216
33
39
41
45
72
71
72
84
101
102
141
151
-
-
-
-
-
-
-
107
175
178
214
249
P
Q
-
-
-
-
-
-
-
104
102
104
151
175
J
P
K
M
Q
L
CONDENSER SECTION
66
72
75
85
115
131
134
154
181
183
219
256
36
41
45
52
92
89
91
98
88
92
123
145
6
SUPPLY AIR/
RETURN AIR
!
!
