1
2
3
4
5
Connection to the application – through automatic search.
(If you added a device by scanning the QR code - (step above), then you should skip this step).
Step 1: Log in to the NaviHome, Smart Life or Tuya Smart application. Select an option → Add devi-
ce, and then select a method → Add device.
Step 2: The application will automatically proceed to the search procedure for available devices.
Step 3: If the device is found, select it to add it to the application.
Step 4: If the process is successful, the application will return appropriate information. Press the
button → Finish to complete the adding process.
Step 5: After adding, you will be immediately redirected to the previously added device.
Figure 26
5.3. Adding devices to the mobile application.
Connection to the application – by scanning the QR code.
(If you have added a device via automatic search - (step below), then you should skip this step).
Step 1: Log in to the NaviHome, Smart Life or Tuya Smart application. Select option → Add device,
and then → Scan QR code (in the upper left corner after sel).
Step 2: Scan the QR code visible on the video monitor screen. To display the QR code, select → →
.
Step 3: The application will automatically proceed to adding the device (this may take up to 2 minu-
tes).
Step 4: If the process is successful, the application will return appropriate information. Press button
→ Finish to complete the adding process.
Step 5: After adding, you will be immediately redirected to the previously added device.