Zamel entry 200 Series, Руководство пользователя, Страница: 36 / 52

3. Configuring the door panel to NVR.
Step 1: While in the „DEVICE MANAGEMENT” mode, select the icon shown in Figure 16 , to
enter the interface as Figure 17.
Step 2: In the interface shown in Figure 17, select RTSP in the setting list to enter the setting interface
as shown in Figures 17, 18 and 19.
Step 3: The default password is admin123, users need to change to their own password, click CON-
FIRM to save.
Step 4: After turn on “RTSP”, the user can add the door panel to the NVR through the MainStream
and SubStream addresses of the door panel, as shown in the Figure 19.
Step 3: After successfully adding the device ad-
dress, the device address will be showed
on the right as Figure 15.
REMARK:
1. To restore the default password, unassign the external panel or reset it to factory settings.
2. This function requires connecting the indoor monitor and outdoor panel to the VP-SW2 signal
distributor. The IP address of the VP-SW2 signal distributor must belong to the same network
segment as the NVR address.
4. Configuring room setting.
Step 1: If only one panel and one monitor are connected within one installation (one family), there
is no need to set the room number (keep the default settings).
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4
192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143
192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4
192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143
192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
LOCAL IP
SUBNET MASK
GATEWAY
DHCP
RTSP
192.168.0.143
255.255.255.0
192.168.0.1
CANCEL CONFIRM
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4 192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143 192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
RTSP
RTSP
CANCEL CONFIRM
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4 192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143 192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
RTSP
RTSP
ENTER PASSWORD
SET A NEW PASSWORD
ENTER THE NEW PASSWORD AGAIN
MainStream
SubStream
CANCEL CONFIRM
rtsp://admin:password@192.168.0.143/01/main
rtsp://admin:password@192.168.0.143/01/sub
Figure 16
Figure 18
Figure 17
Figure 19
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4 192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143 192.168.0.148
5 CAM5
6 CAM6
7 CAM7
8 CAM8
Figure 15