Zamel entry 200 Series, Руководство пользователя, Страница: 34 / 52

DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4 192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3 192.168.0.145
4 192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143
192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
Figure 3 Figure 2
DEVICE MANAGEMENT
1 CAM1
2 CAM2
3 CAM3
4 CAM4
1
2 192.168.0.144
3
192.168.0.145
4 192.168.0.146
192.168.0.147
6
7 192.168.0.149
192.168.0.150
5
192.168.0.148
8
192.168.0.143 192.168.0.143
5 CAM5
6 CAM6
7 CAM7
8 CAM8
F1
F2
RESET
REGION
FIRMWARE VERSION V4.1.1
EUROPE
Figure 5 Figure 4
1.2. Connecting the monitor to a local network via Wi-Fi.
Step 1: Connecting to a Wi-Fi network from the mobile application. Enter the setting menu and select
Wi-Fi in the network setup interface to enter the Wi-Fi setting interface as shown in Figure 6.
Step 2: After turning on Wi-Fi, a Wi-Fi list will pop up, click the Wi-Fi account in the list, enter the
password nd connect to Wi-Fi, as shown in Figure 7 & 8.
Step 3: At the standby state, press , to enter system main menu, Click , to enter the interface as
Figure 9, then click “ADD NEW DEVICES” as shown on the figure.
Step 4: Click on the Door Panel to be added in the device list as Figure 10. In the case of a multi-fa-
mily outdoor panel equipped with two or more buttons, at this stage a list of available buttons
that can be programmed will be displayed on the monitor screen (Figure 5). You must then
select which button (F1, F2, etc.) the paired monitor should be assigned to. Assigning a selec-
ted button on one monitor, understood as Family 1, will prevent its reassignment on another
monitor, understood as Family 2.
Step 5: After successfully adding the device address, the device address will be showed on the right
as Figure 11.
Step 6: To quickly connect to the mobile application, scan the QR code displayed on the monitor
screen. Select „Add device” or the button on the right top corner of the screen / →
(select „Scan QR code” from the list) →
Scan the Wi-Fi QR code on the monitor
(like Figure 12) → Done.
IP CONFIG
VIDEO COMPRESSION STANDARD
WIFI
RESET WIFI
PUSH MESSAGE VIA APP
PUSH MESSAGE DELAY
VOIP
H.265
OFF
0 S
Figure 6