5.3 220mm Fan Installation
5.4 Front Panel Display
(1) Install the provided 220mm Fan and Ffan Grill as shown in the diagram below.
(2) Connect the 220mm Fan’s 3-Pin Connector to the Black 3-Pin Connector.
(3) After the Fan is installed, please be cautious to prevent inference between or among
Tubes and/or cables.
Fan Speed Gauge
- Display the 120mm Rear Fan’s rotation speed in real-time.
FND (Flexible Numeric Display)
- Temperature Display: Coolant Temperature (upper display),
Ambient Temperature (lower display)
- Coolant Level Sensing
If the coolant level drops below a threshold level, an alarm will sound and the display will
flicker. Please refill with coolant, if the display flickers.
- Coolant Temperature Sensing
If the coolant’s temperature reaches above 60°C(92
), an alarm will sound and the FND
Display will flicker. If the flickering is observed, please check for problems.
Coolant Flow Rate Gauge
- Displays the coolant’s flow rate in real time.
Control Knob
- Controls the Fan Speed and Coolant Flow Rate.
Temperature Mode Button
- Sets the temperature display to Celsius(°C) or Fahrenheit(
).
AUTO/MANUAL Button
- AUTO Mode: Automat fan speed and coolant flow rate.
- MANUAL Mode: Allows the user to manually adjust fan speed and coolant flow rate.
LED/RESET Button
- LED On/Off: A short press turn the displays’ LED’s On & Off.
- RESET: A long press for at least 5 seconds resets the cooling system.
When not using the 220mm fan
Performance Tip!
- Make sure the side panel is securely closed for a quiet computing environment.
- Sealing off the I/O cover and PCI Bracket (with tape etc) will optimize the cooler's
performance
220mm Fan Stand Off
Fan Grill
Fan Fixing Bolt
120mm Rear Fan 3-Pin Connector
220mm Fan 3-Pin Connector
Black PCB 3-Pin Connector (for 220mm Fan)
PCI Bracket
I/0 Cover
15
16
Содержание LQ1000
Страница 1: ......