English Version
※
Please read this manual thoroughly before installation.
※
The specifications of this product and its components may change without prior notice to improve
performance.
Visit our website and watch the Z-Machine LQ1000 installation
video for an installation overview.
Installation Notes
1. Check the condition of the product and its components before installation. If there is a
problem with the product and/or its components, please contact the retailer for
replacement.
2. Keep this unit away from heat sources such as direct sunlight, as well as from water, oil,
and humidity. Place the unit on a flat, stable, and well-ventilated area.
3. Do not drop or subject the unit to excessive force.
4. Do not mix any contaminants with the coolant when filling. It may cause product failure or
corrosion.
5. Check the manual when connecting cables. Incorrect connections can lead to fire resulting
from short circuiting.
6. Check for leaks on the Water Blocks and Tubes before installation.
7. Preparing the necessary tools (Needle-Nose Pliers, Scissors) will ease the installation
process.
Operational Notes
1. Check to see if the DC cables are properly connected before use.
2. Avoid inserting any objects into the system while the power is ON. It may be harmful for the
user and product.
3. If the coolant is not circulating properly or if the pump’s flow rate becomes too low for other
reasons, the red LED will begin to flicker with an alarm sound. Immediately turn the system
OFF and contact the place of purchase.
4. Must use the provided coolant. Regularly check the amount of coolant and replenish as
needed (replacement cycle of the ZM-G300 coolant is 1 year).
5. If a leak is found, turn off the system immediately and contact the place of purchase.
6. Do not block the Air Ducts on either side of the product. This can lead to fan failure,
increased noise, or a decrease in product performance.
7. Make sure that the Water Pump is functioning properly.
Disclaimer
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including
but not limited to, improper use, problems with electrical power, accident, neglect, alteration,
repair, improper installation, or improper testing.
Notes
1
2
Содержание LQ1000
Страница 1: ......