4. Installation Guide
4.1 Power Supply Installation
4.4 Motherboard Installation
4.5 3.5”/5.25” Drive Installation
Unscrew the four Bolts (Bolt, FH M3x6) as shown in the diagram to open the Doors.
Place the PSU on the Power Bracket, and screw the four Bolts (A bolt, #6-32*10 (Black))
from outside the enclosure.
Secure the motherboard to the enclosure, then, install components (CPU, VGA, RAM, etc.)
onto the motherboard.
(1) Remove the Bay Covers of the 3.5” (FDD) bay and the 5.25” (ODD) bays
(2) Insert the ODD into desired 5.25” bay, and fix it in place with the Tool Free Bolts.
(3) ODD Slot 3 & 4 and the FDD Slot require using Fixing Bolts (B bolt, M3*5) to secure drives.
4.2 Pump Bracket Removal
To prevent damage to the unit during
transport, the Pump Bracket is removed.
Note) The Pump Bracket can cause
unwanted noise if not removed.
Note) Intel CPU users: please refer
to the CPU waterblock’s
manual for installation
4.3 CPU Water Block(ZM-WB5)
Guide Install
ex) Intel Pentium 4 (Socket 775) installation
Before installing the motherboard,
please refer to ZM-WB5’s manual for
correct socket installation procedures.
Water Pump
Bracket
Water Pump
Water Block
Clip Support Fixing Bolt
Mother Board
Tool-Free Bolt
Slot 3 ODD
Slot 4 ODD
Clip Support for Socket 775
Clip Support for Socket 775
Back plate for Socket 775
FDD Slot
ODD Bay Cover
FDD Bay Cover
7
8
A bolt, #6-32*10(Black)
Содержание LQ1000
Страница 1: ......